|
|
|
|
|
| Thomas |
| New York, US |
|
Has been favorited by 1 people
|
|
|
|
| I'm a: | | Product |
|
| I'm looking for: | | Sales |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
I have an idea and I'm looking for a Co-Founder
|
|
|
| Description | | | | As environmental protection regulations are becoming more and more stringent, the use of freeze dryers is becoming more and more extensive. Briefly explaining the refrigeration dryer, it is mainly used to remove moisture in compressed air for stable production. Regular equipment maintenance effectively extends the life of equipment, promotes stable and efficient production, and reduces cost losses for enterprises.
Many people can't help but ask:
What should I pay attention to when using a freeze dryer? According to the senior technical personnel, the following points should be noted when using a freeze dryer.
1. Do not expose to sunlight, rain, wind, or relative humidity above 85 percent. Do not install in an environment with much dust, corrosive gas, or combustible gas. Do not place the product in a location subject to frequent vibrations or where condensation may freeze. Don't get too close to the wall as this will reduce ventilation. If it is unavoidable to use the product in an environment where corrosive gas exists, please select a dryer that uses a rust-proof copper tube or an alternative stainless steel dryer. Use at an ambient temperature of 40C or less.
2. Do not mistakenly connect the compressed air inlet and outlet. To facilitate maintenance, it is necessary to secure maintenance space and provide bypass piping. Make sure that the weight of the piping is not directly transmitted to the dryer so that the vibration of the air compressor is not transmitted to the dryer. 3. Drain pipes should not be upright, bent or flat.
4. Poor compressed air quality. If a large amount of dust or oil is mixed in, the heat exchanger will become dirty, reducing work efficiency and making the drain more likely to malfunction. A filter is installed at the entrance of the dryer, but the water must be drained once a day.
Application Scenario of Refrigeration Dryer
5. Vacuum the dryer vent once a month.
6. Turn on the power, and after the dryer operates stably, turn on the compressed air. After stopping, wait at least 3 minutes before starting.
7. When using the auto drain, check the refrigerant pressure periodically to check for refrigerant leaks and changes in the capacity of the refrigerator. Check if the condensate temperature is normal.
8th place. Drain valve:
It is one of the most important parts of refrigeration dryer. In summer, the high temperature and humidity of the air increases the amount of moisture, so it is necessary to pay attention to the operation of the drain valve in a timely manner. Also, clean the filter ring regularly to prevent impurities in the air from clogging the drain valve and condensate from entering the gas pipe. |
|
|
|
|
| What am I looking for | | | | Refrigeration dryers have poor environmental adaptability and ambient temperatures that are too high or too low adversely affect the operation of the equipment. Adsorption dryers have relatively strong adaptability to ambient temperature, but the air compressor discharge temperature at the highest ambient temperature is high, so the influencing factors of high dew point value of compressed air pressure should be considered when selecting. Device. |
|
|
|
|
| | | | I am looking for Co-founder that can contribute at least: | | | | | I can contribute at least :* | | |
|
|
|
|
|